0
PCIe x4 Gigabit Ethernet Fiber NIC, Intel 82575 Chipset 1000Base-X Server Network Adapter, Dual GE SFP Port
NIC-9722PF-2SFP is a PCI-Express x4 1000Mbps Dual SFP port server ethernet network fiber adapter card. The NIC-9722PF-2SFP server network adapter card is designed for servers and high-end equipment, and the performance is optimized. It makes the system I/O is no longer a high-end bottleneck. NIC-9722PF-2SFP can realize fault tolerance by bundling group, communication from fault port will be routed to the other members.
NIC-9722PF-2SFP is PCIe dual Port server network adapter, it can multiport fiber connecting to improve internet fuctions, at the same time, it will save PCI-Express slot. In the fiber gigabit network, PCI-Express I/O can ensure the fuctions, and save the bus bandwidth.
Connector
- PCI Express x4,compatible with x8,x16
- Support PCI Express 1.0a (2.5GHz)
- Support Small From Factor PC,low profile(support 2U,3U case)
Features
- Gigabit Dual SFP connector,with SFP moudle
- Fiber Gigabit Ethernet support 1000Base-SX/LX
- Support VMDq
- Support PCI-Express Base Specification, Rev.1.1RD
- High-performance,reliable and low memory latency Intel 82575 gigabit ethernet controller, is a compact component with two fully integrated Gigabit Ethernet Media Access Control (MAC), physical layer (PHY) ports and SerDes interface
- EEPROM and FLASH, it can be also be used in EEPROMless configurations
- Increased throughput and lower CPU utilization,avoid PCI-express in jam
- Hardware accelerate can partial load CUP tasks. Transmit and receive IP, TCP and UDP checksum off-loading
- Capabilities, Transmit TCP segmentation
- Support 802.1p layer 2 priority encoding
- Support802.1q VLAN tagging
- Jumbo frame 9.5 kByte
- Support 802.x flow control
- Simple Network Management Protocol (SNMP) II statistics,Ethernet like MIB ,Ethernet MIB (802.3z,Clause 30)
- Link/Active/Speed LED indicate
Specifications
- IEEE stardard/ network topology: Gigabit ethernet network,1000Base-SX (850nm) or 1000Base-LX (1310nm)
- Transfer Data Rate: Peak bandwidth 2 GB/s in each direction per PCI Express lane in Full duplex
- SFP Module: Compatible with SFP MM and SM module, Based on gigabit SFP transceivers which be optional and replaceable
- Connector: PCI-Express Base Specification, Rev.1.1RD
- Size: 168mm X 69mm
- PCI Express: X4,compatible with x8,x16
- PCI Express voltage: +3.3V 9%
- IC Controller: Intel 82575EB
- Bracket: Full-height and low profile
- Status LEDs
- 2 (1/port,) solid and blinking
- Link: ON=communication link (orange color)
- ACT: Flashing=activity on link (Green color)
- LED Location: LED in PCB,it can see through bracket
- Connector: SFP Slot,compatible with all kinds of gigbiat SFP module,LC connector
NOS Software Support
- DOS, Novell ODI
- Windows 2000
- Windows XP 32-bit(64-bit)
- Windows Server 2003 32-bit(64-bit)
- Windows Vista 32-bit(64-bit)
- Windows 7 32-bit(64-bit)
- Windows 8 32-bit(64-bit)
- Windows Server 2008 32-bi(64-bit)
- Windows Server 2008 R2 32-bit(64-bit)
- Windows Server 2012
- Windows Server 2012 R2
- Novell Netware 5.x,6.x
- Linux 2.4 series kernel and 2.6.x and 3.x
- FreeBSD 7.x or most of the FreeBSD
- OS 8 or laster
- SCO Open Server
- UnixWare / OpenUnix 8
- Sun Solaris x86
- OS Independent