Categories

PCIe Gigabit Ethernet Single RJ45 Port Network Interface Card, PCI Express x1 Intel I211 Chipset Desktop Network Adapter

Manufacturer: Cablexa
Part Number: NIC-9202CT
Availability: In Stock
Ships: Usually in 2 days
Price: $32.00

Qty

 

NIC-9202CT is a PCI-E bus support, manageable gigabit RJ45 Single Port Network Card.The Card contains two transmit and two receive queues for the single port. It has advanced interrupt-handling,IPv4 and IPv6 checksum offload,TCP/UDP checksum offload features and the Auto-Negotiation (Nway) function ,Jumbo Frame support.With single UTP/STP and the Auto-Negotiation (Nway) function support, the Card can auto-negotiate 10Mbps, 100Mbps or 1000Mbps speed, and half or full duplex mode with its link partner (a hub, for example). Supports ACPI, compliant with PCI Express2.1. Full range of drivers are provided for major Operating Systems.

Features

  • On-chip integrated Switching Voltage Regulator (iSVR)
  • IEEE 802.3 auto-negotiaton
  • 1 Gb/s Ethernet IEEE 802.3, 802.3u, 802.3ab PHY
  • Integrated PHY for 10/100/1000 Mb/s for multi-speed, full, and half-duplex
  • IEEE 802.3x and IEEE 802.3z compliant flow control
  • Support with software-controllable Rx thresholds and Tx pause frames
  • Automatic cross-over detection function (MDI/MDI-X)
  • IEEE 1588 protocol and 802.1AS implementation
  • PXE support
  • IEEE 802.3az - Energy Efficient Ethernet (EEE)
  • Smart Power Down (SPD) at S0 no link/Sx no link
  • Active State Power Management (ASPM)
  • LAN disable function
  • Full wake up support
  • Advanced Power Management (APM) Support
  • Advanced Configuration and Power Interface
  • (ACPI) specification v2.0c
  • Magic Packet wake-up enable with unique MAC address
  • ACPI register set and power down functionality supporting D0 and D3 states
  • MAC Power Management controls
  • Low Power Link Up Link Speed Control

Networking Protocol

  • IEEE 802.3 Ethernet interface for 1000BASE-T, 100BASE-TX, and 10BASE-T applications (802.3, 802.3u, and 802.3ab)

Specification

  • Brand:LR-LINK
  • Model:LREC9202CT
  • Type:Gigabit copper network card
  • Transfer Rate:10/100/1000Mbps Nway Auto-negotiation
  • Bus:PCI Express
  • Connector:RJ45
  • Number of Ports:1
  • PXE:support
  • Jumbo Frame:9.5KB
  • LED Indicator:1000M Link/Act, 100M Link/Act, 10 Link/Act, Duplex
  • Field of Application:Desktop
  • Chipset:Intel I211-AT
  • Bracket :High-profile /Low-profile Bracket

NOS Software Support

  • Microsoft Windows 7
  • Microsoft Windows Vista (32 & 64 bit)
  • Microsoft Windows XP (32 & 64 bit)
  • Microsoft Windows CE
  • Microsoft Windows NT
  • Microsoft Windows 2000 Server
  • Microsoft Windows Server 2003 (32 & 64 bit)
  • SCO UnixWare 7.x
  • Open Unix 8.0
  • Novell ODI
  • Novell Netware
  • SUSE Linux Enterprise Server 9.0
  • Red Hat Enterprise Linux 4.0
  • Linux
  • FreeBSD
  • Sun Solaris
  • Microsoft DOS
  • VMWare ESX

Write a review

Note: HTML is not translated!
    Bad           Good