Single Fiber 10/100/1000M Managed Standalone Fiber Media Converter, Built-in Power Supply, 1-port Fiber & 1-port RJ45, Tx:1550nm/Rx:1310nm, Singlemode, 40km

Manufacturer: Cablexa
Part Number: MFMC-GEBSA-1F1T-5531S40
Availability: In Stock
Ships: Usually in 2 days
Price: $186.00

Available Options



This Managed Gigabit Fiber Media Converter is designed to make conversion between 1000Base-FX to 10/100/1000Base-TX Gigabit Ethernet. With SNMP agent and web-based management, the network administrator can logon the converter to monitor, configure and control the activity of each port. In addition, the converter implements bandwidth rating management capability via the intelligent software. The overall network management is enhanced, and the network efficiency is also improved to accommodate and deliver high bandwidth applications.

The converter is completely transparent when connected so the network performs exactly the way it did before - only now, it allows the co-existence of both copper and fiber mediums. Added flexibility is available with ST, SC, FC and WDM Simplex SC connectors. Extra distances are possible with the single mode version delivering up to 120km connectivity per transmitted segment.


  • Complies with IEEE 802.3, IEEE 802.3u, IEEE802.3z, IEEE802.3ab, IEEE 802.3x auto-negotiation
  • Extends distances ranging from 0.5km (multi-mode fiber) to120km (single mode fiber)
  • Wall-Mountable
  • Auto-negotiation of duplex(HDX/FDX) on RJ-45 port
  • Auto MDI/MDI-X support on RJ-45 port
  • Rate Limit function, 64Kbps
  • Supporting Loopback, precisely locating the failure,convenient for link test
  • Supporting LFP, quickly locates the failure
  • Supporting remote power off alarming
  • Economical management function within bandwidth
  • Supporting Remote management
  • Easy installation with complete LED indicators for workingsituation
  • With powerful network management function, supporting WEBand SNMP


Interface1 x Ethernet port (RJ45) 10/100/1000Base-Tx
1 x Optical port (1x9) 1000Base-Fx
Optical PortWavelength: Tx:1550nm/Rx:1310nm, Singlemode
Transfer Distance: up to 40Km
Connectors: SC/PC, ST/PC, FC/PC optional
Ethernet PortAvailable speed: force 100 Mbps, force 1000 Mbps and auto-detective 10/100Mbps Full-Duplex and Half-Duplex
Connectors: RJ-45 Connector; MDI/MDI-X connectionauto-sensing
IEEE802.3ab (1000Base-T)
IEEE802.3z (1000Base-SX/LX/CX/T)
IEEE802.3x(Flow control)
SNMP v1/v2c(Simple Network Management Protocol)
LED IndicatorsPower Status, Speed Status, FX Link/Act, TX Link/Act
EnvironmentalLimitsOperating Temperature: 0°C to 50°C
Storage Temperature: -20°C to 70°C
Operating Humidity: 10% to 90% RH (non-condensing)
Storage Humidity: 5% to 90% RH (non-condensing)
Agency ApprovalsFCC Part 15 of Class A & CE approved


1, Managed Ethernet to Fiber Links

Manage your copper to fiber link with a Managed Standalone Media Converter. Ideal for use in managed networks with low density fiber applications. A Managed Standalone Media Converter is connected across a fiber link to a remote media converter. The copper and fiber link on the managed standalone unit can provide vital information and status to network management tools such as SNMP.

2, Connect 10/100 devices to Gigabit Backbone

Devices on a 10/100 ethernet switch can be connected to a Gigabit backbone through the use of rate converting 10/100/1000 Media Converters.

Write a review

Note: HTML is not translated!
    Bad           Good